Pulverizer Machine Cleaning Method

Pulverizer Machine cleaning method

Grinder cleaning methods and problems

Machine cleaning method common problems, power does not work or travel after a small machine, cause and cleaning method can

1 Disconnect the power supply, the voltage is too low; Cleaning method: Check the power supply (switch, socket, insurance, motor wiring) cleaning problems to ensure 380V voltage.

malfunction

2 small factory magnetic starter; cleaning method: replacement of magnetic initiator.

3 motor burned; cleaning method: replace the motor.

4 small factory power line grounding fault; cleaning method: the correct connection. Two, crusher bounce, unexpectedly,

1 motor running direction is the cause of the error and the cleaning method of cleaning method: AC motor; three-stage and two wire diameter range

2 overtake rule size; cleaning method: according to the size of the feeder.

3 moisture content is too high; cleaning method: first material, and then crushed air monotonous.

4 sieve hole; cleaning method: sieve.

Third, start the protection device can not start, the reasons and cleaning methods can be

1 first feed, boot, crushing chamber bets; cleaning method: the first launch, after eating.

2 shots too many crushing chamber bets; cleaning method: uniform feeding.

3 kinds of lack of power; check the three-phase power is correct? normal.

4 thermal overload relay obstacle;

Cleaning method: dispatch the thermal overload relay to start the current protection device. There are four small factories, abnormal dynamic operation, the reasons and cleaning methods can be

1 metal into the crushing chamber; cleaning method: check the material of the metal material mixture.

2 hammer, small shaft wear plate; cleaning method: replace the small axis.

3 mechanical fasteners loose; cleaning method: tighten fasteners.

Five small factories boring (stickers), and a cleaning method can Cause material 1, the cleaning method start: stop. After the first start, feed. 2 lens too much; cleaning method: the amount of uniform feeding.